Detailed Product Description

Features:
1) When conducting braking, if one of the tyres is going to stop running,
    the normally-open valve will be closed, at that time, even though the force 
    on the pedal is increasing, the pressure on the brake will remain the same. 
    In such condition, the regulator will instruct the normally-close valve to 
    open and then is the pressure-reduction time, after that, when the trend 
    of stop of running of tyre is eliminated, the normally-open valve will open,
    while the normally-close valve close and the braking pipeline will be at 
    the normal time of pressure increasing again
2) The low-pressure accumulator has the structure of spring piston, the 
    function of which is to temporarily keep the brake fluid the reflux pump 
    doesn't have the time to pump out
3) The reflux pump is of plunger structure, driven by the motor, and gives 
    the brake fluid back to the brake baster cylinder when ABS is conducting 
    braking
4) The high-pressure damper is to reduce the drastic pulsating of the hydraulic 
    pressure when ABS is conducting braking and reduce the noise of hydraulic 
    pressure as well

Technical requirements:
1) Medium: brake fluid (DOT4); temperature range: -40oC- 
    125oC; working pressure range:14-16Mpa; coil voltage: 
    12V (DC)
2) Insulation resistance: above 100MΩNo flashover and breakdown 
    under 500V for one minute
3) All the components should be free of burs and damages and cleaned 
    before assembly
4) No leakage is allowed when the hydraulic regulator is under 1.5 times 
    of the working pressure for 3 minutes; And no fragmentation and damage 
    occurs when it is under 2.5 times of the working pressure for 1 minute
5) The hydraulic regulator should pass 100 million times of operation test 
    and the moving parts will not get stuck during the test
6) The reaction time of opening and closing of the solenoid valve is no 
    more than 5ms when it is loaded
7) The time of repeatability of opening and closing of the solenoid valve 
    is 0.1ms

Outer packing:
12 sets/ctn